• Deep Groove Ball Bearing
• Self-aligning Ball Bearing
• Angular Contact Ball Bearing
• Thrust Ball Bearing
• Tapered Roller Bearing
• Spherical Roller Bearing
• Cylindrical Roller Bearing
• Spherical Roller Thrust Bearing
• Cylindrical Roller Thrust Bearing
• Needle Roller Bearing
• Pillow Block Bearing
• Plummer Block Housing
• Adapter Sleeve & Withdrawal Sleeve
• Spherical Plain Bearing & Rod End
• Linear Motion Ball Bearing
• Auto Bearing
• Agricultural Bearing
• Stainless Steel Bearing
• Full Ceramic Bearing
• Steel Ball
• Special Bearing

Features

Yoke and stud type roller bearing track rollers:

· are ready-to-fit needle or cylindrical roller bearings of single or double row design;

· are mounted on shafts or studs (yoke type track rollers) or supplied with a heavy-section roller stud with fixing thread and a mounting aid (stud type track rollers);

· have particularly thick-walled outer rings with a crowned outside surface;

· can support high radial loads;

· tolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impacts;

· are available with or without an inner ring (yoke type track rollers);

· are produced with or without axial guidance of the outer ring (stud type track rollers are always produced with axial guidance);

· are open or sealed on both sides;

· are not mounted in a housing bore, but are supported on a flat mating track;

· can be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction.